Basic Sourdough Boule 1.0

Basic Sourdough Boule 1.0

Note: this recipe was originally published in 2019, and after much feedback and in response to a new wheat crop, we updated our recipe here. We decided to keep the original published for those who have become fond of the old version! For new videos and the updated recipe head here. 

Making sourdough bread from scratch can seem daunting, but with time and perseverance, it can become something that is easily added to your weekly routine. It will take some trial and error as sourdough bread has many variables that can all impact your finished product.

Adjusting water temperatures and ratios is a great way to experiment with what works in your home. This method takes about three and a half to four hours but is not very hands-on or labour intensive. A good dutch oven is necessary to generate enough steam in your home oven to create the beautiful crust and soft interior that is associated with good sourdough bread.

A kitchen scale is required for this recipe, in order to eliminate the variable of too much or too little flour, starter, water, or salt. To learn about how to make and maintain your own sourdough starter head here. For more in-depth tips on sourdough starter maintenance, head here.

Basic Sourdough Boule
Yield: two loaves
1000 grams Flourist Sifted Red Spring Wheat Flour
825 grams warm water (between 82-85°F)
175 grams sourdough starter
25 grams salt

Plan to prep the loaves the day before you would like to enjoy fresh bread (this will require up to 4 hours). This recipe is easily halved or doubled depending on how many bannetons you own. 

Float Test
First, check to make sure that your sourdough starter is ready to be used by performing a float test. This is done by dropping some of the starter into lukewarm water to see if it floats or if it sinks. If it floats, it is ready to use and you can begin making your bread. If it sinks, it requires more time to become active.

Autolyse
Weigh the water first, by adding a large mixing bowl and hitting the tare function on the scale to balance the weight at zero. Add the sourdough starter. Mix with your hand to break up the starter and then add the flour. Mix by hand until there are no dry spots and a shaggy dough is formed. Let the dough rest in a warm place for 30 minutes covered with a tea towel. This stage is called the autolyse.

After the 30 minutes has passed, the dough should look like this.

Add Salt 
Next, combine the salt with 2 tbsp of lukewarm water and add to the dough. Wet your hands and squeeze the dough to incorporate the salt into the dough.

First Fold
Once combined, perform your first fold by grasping the top of the dough and folding it onto itself by pulling it towards the bottom, doing the same from the bottom to the top, and the same from side to side. Flip the dough over and let sit again, covered with a tea towel, for 30 minutes. 
 

Bulk Fermentation 
Repeat this folding process 5 more times for a total of 6 folds with 30 minutes of rest time between each fold. This is called the bulk fermentation stage. 

After the last fold and final 30-minute rest, lightly flour the top of the dough or your counter to prevent the bread dough from sticking, and invert the dough onto the counter. Divide evenly into two loaves and prepare to pre-shape. 

Pre-shape & Bench Rest 
To pre-shape, bring the edges of the dough into the center, being careful not to deflate the dough by pressing too hard. Once the dough is in a round shape and feels taut, flip the loaf over and tighten further by rotating the boule with a bench scraper and your hand and pulling the loaf in on itself. The loaf should begin to feel taut but the surface should not tear. Let sit for another 20-30 minutes. This is called the bench rest.

 

While the dough is resting, prepare your baskets. You can either flour the inside of the basket generously or insert a tea towel into the basket and flour that. Using a tea towel means you will not get the ridges from the basket, but is also easier to remove the loaf if it is wet and sticky. 

Final Shape
Once the bench rest is complete it is time to do the final shape. Flip the dough over with your bench scraper and begin folding the dough in on itself. You want to make the dough as taut as possible, as this will create a nice high loaf and also help the scores to open up beautifully. 

Once you have finished shaping your loaf, gently place it seam side up in your floured basket. Let rest in the fridge overnight for 8-12 hours. This is called the final proof. 

Baking
Preheat your oven to 450°F. Place a dutch oven with a lid inside the oven while it is preheating. Remove one of the loaves from the fridge and let rest at room temperature in the basket for 20 minutes while your oven is preheating. Carefully remove the dutch oven from the oven and invert your loaf into it. Score as desired, using a sharp razor blade or sharp paring knife. Replace the lid and return the dutch oven to the hot oven.

Immediately lower the heat to 425°F. Bake for 30 minutes then remove the lid, being careful as steam will release. Bake for an additional 10-15 minutes, until the colour is nice and dark and the bottom sounds hollow when you knock on it. Alternatively, you can check the internal temperature which should be between 190°F and 200°F. Let cool on a wire rack before slicing. Enjoy! 

← Older Post Newer Post →

Comments

  • found the dough far to wet to work with and almost impossible to get out of the proofing basket. My regular recipe uses 70% hydration vs the 87% in this version. In the pictures outlining the techniques the dough also looks much drier. Used the red spring wheat, tasted great, baked for 30 mins then 18 with cover off, would bake additional 3 to 5 mins.

    Dan on
  • Would you just half the recipe for all ingredients if you only want to make one loaf?

    Liz k on
  • Just made my first loaves with your flour, came out well although strangely pale and shiny on top! Agree with earlier comments about too much water – I always used to measure my water in mils and found I had to add a lot more to make it up to the weight you suggested, and it would have been easier to manage with less.

    Angela Hoy on
  • Wow made my first sourdough loaf. I thought for sure it wasn’t working and then it did! Directions from the basic boule recipe were very good – I used 20 g less water as per some comments of wet dough and it seemed to work. My loaves didn’t look as nice before going in the oven – not as tight across the top so probably flatter loaves but they have big holes in them and taste amazing. Very pleased. Thanks!!

    Christine on
  • I found the dough way too wet and sticky throughout the process. Gained some strength with each stretch and fold, but then would slop back by the time I came back 30 minutes later. Stuck to the banneton, and had to coax it out using my fingers in the morning, which destroyed any shaping I had done.
    Wondering how much to decrease the water by? I know each environment is different, so it makes sense that one recipe might not work well for everyone.
    Also wondering if I should cover the banneton in the fridge? And what with? Towel? Plastic wrap?

    Melissa B on
  • Just made two loaves, one using Red Spring Wheat Flour and the other with Robin Hood Best for Bread white. Both turned out amazingly well, although the Red Spring loaf tasted so much better. I halved the recipe and found that the dough would have been more manageable with about 20 gr less water. I also halved the amount of salt suggested.

    Angela on
  • Hi! Yes! Reducing water is a good idea. It sounds like not enough strength was developed during the mixing and folds, so reducing the hydration will make it easier to work with! We hope that helps!

    Shira on
  • If my loaves are too soft and spread out when turned out of the banneton, should I reduce water, or is there another reason for this?

    Sara on
  • I just baked this off today, with a couple of changes to the basic recipe, and it turned out absolutely perfect! My changes were to add 1/2 tsp instant yeast, and I used my discarded starter – about 250g plus water to equal 1050g total moisture. Possibly the best bread I’ve made! (…and I’ve been making bread for over 35 years)

    Susan on
  • Most stainless steel has no more or less antimicrobial properties than glass or plastic.

    There is stainless that is produced with a silver alloy surface layer, but you’re not likely to find that outside of a hospital unless you’ve intentionally bought it.

    Justin on

  • 1
  • 2
  • 3
  • 4

Leave a comment